Dumpster Sizes Explained: 10, 15, 20, 30 and 40 Yard (What Actually Fits)

Updated 2026-11-18 · Sources listed below

Summary: A yard is one cubic yard of space (3 ft x 3 ft x 3 ft). Most homeowners need a 10, 15 or 20 yard. The bigger the bin, the more likely weight, not space, sets your final bill.

The short answer

If you're torn between two sizes, the bigger one often costs only $50-$100 more in the price lists below. But a bigger bin also makes it easier to load more weight than is included, and overage is where bills jump. See weight limits and overage fees.

What a "yard" is

Dumpster sizes are in cubic yards. One cubic yard is 3 ft x 3 ft x 3 ft = 27 cubic feet. A 10-yard bin holds about 270 cubic feet if you fill it level with the top, which is how haulers expect it loaded. Pellitteri Waste Systems uses a rule of thumb that an average pickup bed holds about 2 cubic yards, which is a handy way to picture it.

Real dimensions from local haulers

Sizes aren't standardized. Two companies' "20 yard" bins can be very different shapes. These are dimensions the haulers in our directory publish (L x W x H):

Size Examples from hauler sites Approx. pickup loads*
10 yd 12' x 8' x 4' (Apex); 14' x 8' x 4' (Trash Monkey, PDL); 10' x 8' x 2.6' (Madison Dumpster Rental) 4-5
12 yd 14' x 8' x 4' (Pellitteri); 12' x 7' x 4' (Gregory) ~6
15 yd 16' x 8' x 4' (Apex); 14' x 8' x 5' (PDL); 15' x 7' x 4.5' (Gregory) ~7
20 yd 16' x 8' x 5' (Apex); 14' x 8' x 6' (PDL); 22' x 8' x 4' (Pellitteri) ~10
30 yd 18' x 8' x 6' (Apex); 20' x 8' x 6' (PDL); 22' x 8' x 6' (Pellitteri) ~15
40 yd 22' x 8' x 7' (PDL) ~20

*Using roughly 2 cubic yards per pickup bed (Pellitteri's figure). Apex estimates ~5 loads for a 10-yard, ~7 for a 15, ~10 for a 20.

Why the shape matters: - Length decides whether it fits your driveway. Pellitteri says to plan for about 12 ft of width and 40-55 ft of straight access for the truck, plus about 10 ft behind the bin for the rear door. - Height decides how easy it is to load. 4-ft walls are easy to toss over; 6-7 ft walls mean you'll be walking debris in through the rear door.

Matching size to the job

Project Usual size Watch out for
Garage, attic or basement cleanout 10-15 yd Furniture is bulky but light; space runs out before weight
Bathroom remodel 10 yd Tile, mortar and cast iron are heavy
Kitchen remodel 15-20 yd Cabinets are bulky; countertops (stone) are heavy
Flooring / carpet tear-out (whole house) 15-20 yd Carpet pad is light; tile is not
Roof tear-off 10-20 yd (by squares) Shingles are heavy; often priced per ton or need a shingle-only bin
Deck removal 15-20 yd Lumber is light per yard; concrete footings are not
Whole-house / estate cleanout 20-30 yd Several swaps of a smaller bin can cost less than one huge bin
Concrete, dirt, rock, brick 6-12 yd heavy-material bin Many haulers won't allow it in standard bins at all

Roofing: size by squares

A roofing "square" is 100 sq ft of roof. Haulers publish their own capacity estimates:

Those estimates differ, which is normal: layers, shingle type and how flat you pack them all change the result. Ask your hauler, and ask whether they price shingles by the ton. Apex, for example, charges $75/ton for clean shingles (shingles, nails, tar paper only) and $125/ton for mixed loads.

Heavy materials: why bigger isn't better

The EPA's standard conversion factors put loose concrete at about 860 lbs per cubic yard and dirt/sand at about 929 lbs per cubic yard. A 10-yard bin filled with broken concrete would be roughly 8,600 lbs, more than four tons, which is why haulers:

Never fill a large bin with heavy material without asking first. It may be refused, or it may be too heavy for the truck to lift.

How to pick without overpaying

  1. Estimate volume in pickup loads (about 2 cubic yards each).
  2. Estimate weight using the weight guide. If weight beats space, pick the smaller bin.
  3. Check length against your driveway, and ask whether the hauler uses boards to protect it.
  4. Compare the full price, meaning included tons, days and extra-day fees, using a city page.

FAQ

What does "yard" mean for a dumpster?

It is cubic yards of volume. One cubic yard is 3 ft x 3 ft x 3 ft, or 27 cubic feet. A 20-yard dumpster holds about 540 cubic feet when filled level.

How many pickup truck loads fit in a 10-yard dumpster?

Haulers' estimates vary: Trash Monkey (Madison) says about 4 pickup loads, Apex (Madison) says about 5. Pellitteri uses roughly 2 cubic yards per pickup bed, which works out to about 5.

What size dumpster do I need for a roof?

It depends on squares, not square feet of house. Apex (Madison) estimates up to about 30 squares of clean shingles in a 10-yard and 45-65 squares in a 20-yard. Shingles are heavy, so many haulers price them by the ton or limit them to smaller bins.

Are all 20-yard dumpsters the same size?

No. In the hauler listings we checked, 20-yard bins ranged from 14 ft to 22 ft long and 4 ft to 6 ft tall. Length matters if your driveway is short.

Sources

  1. Pellitteri Waste Systems: temporary dumpster sizes
  2. Apex Dumpster Rental (Madison, WI): sizes, shingle capacity
  3. Trash Monkey Dumpster Rental: dimensions
  4. PDL Waste Solutions: dimensions incl. 40-yard
  5. Gregory Roll-Off Containers (Akron, OH): dimensions
  6. US EPA: Volume-to-Weight Conversion Factors (2016)

Local prices cited are as posted by each company on 2026-11-18. Find haulers near you on our city pages.